Home
>
products
>
Endoscopy Processor
>
|
| Model Number | CV/CLV-240 |
The Olympus CV-240 Video Processor is compatible with standard and big chip endoscopes. The CV-240 allows the user to enhance, freeze, and adjust color settings to provide clear and accurate images from inside the body.
Compatible with the full range of endoscopes from EVIS 100, 130 and 140 series endoscopes
Wide screen image functionality with used in conjunction with Q series endoscopes such as GIF-Q140 and CF-Q140L
Pre-set scope switch functions. Endoscopist has a choice from up to 20 pre-set endoscope switch functions
Pre-program patient data. Up to 40 files of patient data can be pre-entered into memory to expedite procedure turn around.
Do not place the endoscope together with other instruments and avoid touching other parts with the insertion part.
Wait until the endoscope angle returns to the 0-degree state before pulling out.
Since the insertion part is long, please be careful when cleaning and storing it, and be sure to confirm that it is not stuck beforehand.
When sterilizing EVIS endoscopes with ethylene oxide, remove the waterproof cap; when sterilizing other endoscopes with ethylene oxide, put on the ETO cap.
Wait until the endoscope angle returns to the 0-degree state, then pull out from the trocar needle and trocar.
When adjusting the angle of the insertion part, the angle should not be smaller than the range indicated in the instruction manual.
Please keep the sheath as straight as possible during operation.
Hold the insert gently and handle it carefully when taking it out.
