Home
>
products
>
Endoscopy Processor
>
|
| Model Number | OTV-S4 |
Olympus OTV-S4 is used to transmit endoscopic images for easy observation by the surgeon during the procedure. It can work with endoscopes, rigid and fiber optic cameras.
The Olympus OTV-S4 is an Endoscopy Camera System. It was designed to transmit endoscopic images for observation. It can work with endoscopes, rigid and fiberoptic camera heads. The OVT-S4 Camera System is a Circon shakable solid state MicroVideo Camera.
Circon soakable solid-state color MicroVideo camera.
power on/off pushbutton with green indicator light.
back of unit has connectors for character generator and video in and out.
7 foot power cord with hospital grade plug.
Dimensions
Height: 3.25 in ( 12.5 cm)
Width: 12.25 in (29.5 cm)
Depth: 9 in (37 cm)
Weight: 12kg (26.5 lb)
Do not place the endoscope together with other instruments and avoid touching other parts with the insertion part.
Wait until the endoscope angle returns to the 0-degree state before pulling out.
Since the insertion part is long, please be careful when cleaning and storing it, and be sure to confirm that it is not stuck beforehand.
When sterilizing EVIS endoscopes with ethylene oxide, remove the waterproof cap; when sterilizing other endoscopes with ethylene oxide, put on the ETO cap.
Wait until the endoscope angle returns to the 0-degree state, then pull out from the trocar needle and trocar.
When adjusting the angle of the insertion part, the angle should not be smaller than the range indicated in the instruction manual.
Please keep the sheath as straight as possible during operation.
Hold the insert gently and handle it carefully when taking it out.
