Home
>
products
>
Endoscopy Processor
>
|
| Model Number | 5525 |
ENDOCAM®Logic HD camera system can adapt to different sensor technologies: 3CCD,1CCD, C-MOS. The demand-driven selection features of cutting-edge cameras need hardly any improvement. You'll benefit from convenient digital technology, the newly developed Chip-on-the-Tip eyeMAX endoscope, and more. The system concept complements an intelligent LED light source, efficient light conduction, and powerful monitoring technology.
Highly developed dialogue function
The dialog function supports automatic camera control of light sources. The operator does not need to make any further adjustments - making the operation more humane.
Universal connection Settings
ENDOCAM®Logic HD camera system is set according to top image transmission standards and provides maximum flexibility.
Unparalleled flexibility
Do not place the endoscope together with other instruments and avoid touching other parts with the insertion part.
Wait until the endoscope angle returns to the 0-degree state before pulling out.
Since the insertion part is long, please be careful when cleaning and storing it, and be sure to confirm that it is not stuck beforehand.
When sterilizing EVIS endoscopes with ethylene oxide, remove the waterproof cap; when sterilizing other endoscopes with ethylene oxide, put on the ETO cap.
Wait until the endoscope angle returns to the 0-degree state, then pull out from the trocar needle and trocar.
When adjusting the angle of the insertion part, the angle should not be smaller than the range indicated in the instruction manual.
Please keep the sheath as straight as possible during operation.
Hold the insert gently and handle it carefully when taking it out.
