Home
>
products
>
Endoscopy Processor
>
|
FTS 400 Processor & 400 Light Source with the processor and the light source unit employing state-of-the-art digital signal processing, it retains image fineness and precision in picture quality even when viewing microvessels or mucosal surfaces. It also features an HD(High Definition)-compatible processor providing even sharper images with HD signals. On the operation, panels are illuminated buttons with pictograms, which are access-friendly during the examination.
Recommendations for Endoscopic Maintenance and Care
Do not place the endoscope together with other instruments and avoid touching other parts with the insertion part.
Wait until the endoscope angle returns to the 0-degree state before pulling out.
Since the insertion part is long, please be careful when cleaning and storing it, and be sure to confirm that it is not stuck beforehand.
When sterilizing EVIS endoscopes with ethylene oxide, remove the waterproof cap; when sterilizing other endoscopes with ethylene oxide, put on the ETO cap.
Wait until the endoscope angle returns to the 0-degree state, then pull out from the trocar needle and trocar.
When adjusting the angle of the insertion part, the angle should not be smaller than the range indicated in the instruction manual.
Please keep the sheath as straight as possible during operation.
Hold the insert gently and handle it carefully when taking it out.
Store the endoscopy equipment for sale in a dry and well-ventilated place at room temperature and in a clean condition.
