logo
Send Message
HK FY-MED TRADING CO., LIMITED
Email tina@fyendoscopy.com TEL: 853-68902598
Home > products > Endoscopy Processor >
UES-20 Electrosurgical Unit Endoscopy System For Endoscopy Processor
  • UES-20 Electrosurgical Unit Endoscopy System For Endoscopy Processor
  • UES-20 Electrosurgical Unit Endoscopy System For Endoscopy Processor

UES-20 Electrosurgical Unit Endoscopy System For Endoscopy Processor

Model Number UES-20
Product Details
Highlight: 

UES-20 Endoscopy System

,

UES-20 Electrosurgical Unit

,

UES-20 Electrosurgical Unit Endoscopy System

Product Description

UES-20 Electrosurgical Unit Endoscopy System For Endoscopy Processor

 

HK FY-MED, advocating the concept of environmental protection and saving, aims to improve the quality of endoscopic products and the service life of the products, thus helping customers to save costs. In addition, we are committed to developing endoscopic equipment and accessories for a long time so as to meet the needs of our customers. We believe that our long time working in the field of endoscopy will enable us to take our service in the field of endoscopy to the next level.

 

 

 

 

Parameters Of UES-20 Electrosurgical Unit

 

 

  • Brand: Olympus

  • Type: Endoscopy System

  • Model: UES-20

  • DIMENSIONS (HXWXD) CM, (IN) (DISPLAY): 18 x 29.5 x 43 (7.1 x 11.6 x 16.9)

  • WEIGHT, kg (lb) (DISPLAY): 17.5 (38.5)

 

 

 

UES-20 Electrosurgical Unit Endoscopy System For Endoscopy Processor 0

 

 

 

The processor has a signal processing circuit that is provided with a digital signal processor. The digital processor generates a coarse video signal that is indirectly displayable on a video screen from image signals generated by a charge coupled device sensor .An auxiliary circuit has a correction circuit that generates another coarse video signal that is directly displayable on the video screen included for the following: (a) video endoscope (b) a camera for an endoscope.

 

 

 

Recommendations for Endoscopic Maintenance and Care

 

 

  • Do not place the endoscope together with other instruments and avoid touching other parts with the insertion part.

  • Wait until the endoscope angle returns to the 0-degree state before pulling out.

  • Since the insertion part is long, please be careful when cleaning and storing it, and be sure to confirm that it is not stuck beforehand.

  • When sterilizing EVIS endoscopes with ethylene oxide, remove the waterproof cap; when sterilizing other endoscopes with ethylene oxide, put on the ETO cap.

  • Wait until the endoscope angle returns to the 0-degree state, then pull out from the trocar needle and trocar.

  • When adjusting the angle of the insertion part, the angle should not be smaller than the range indicated in the instruction manual.

  • Please keep the sheath as straight as possible during operation.

  • Hold the insert gently and handle it carefully when taking it out.

  • Store the endoscopy equipment for sale in a dry and well-ventilated place at room temperature and in a clean condition.

Contact Us at Any Time

853-68902598
Rd Central HongKong
Send your inquiry directly to us